^^&&^^

Edit File: test_handlers_bcrypt.py

"""passlib.tests.test_handlers - tests for passlib hash algorithms"""
#=============================================================================
# imports
#=============================================================================
from __future__ import with_statement
# core
import logging; log = logging.getLogger(__name__)
import os
import warnings
# site
# pkg
from passlib import hash
from passlib.handlers.bcrypt import IDENT_2, IDENT_2X
from passlib.utils import repeat_string, to_bytes
from passlib.utils.compat import irange
from passlib.tests.utils import HandlerCase, TEST_MODE
from passlib.tests.test_handlers import UPASS_TABLE
# module

#=============================================================================
# bcrypt
#=============================================================================
class _bcrypt_test(HandlerCase):
    """base for BCrypt test cases"""
    handler = hash.bcrypt
    reduce_default_rounds = True
    fuzz_salts_need_bcrypt_repair = True
    has_os_crypt_fallback = False

known_correct_hashes = [
        #
        # from JTR 1.7.9
        #
        ('U*U*U*U*', '$2a$05$c92SVSfjeiCD6F2nAD6y0uBpJDjdRkt0EgeC4/31Rf2LUZbDRDE.O'),
        ('U*U***U', '$2a$05$WY62Xk2TXZ7EvVDQ5fmjNu7b0GEzSzUXUh2cllxJwhtOeMtWV3Ujq'),
        ('U*U***U*', '$2a$05$Fa0iKV3E2SYVUlMknirWU.CFYGvJ67UwVKI1E2FP6XeLiZGcH3MJi'),
        ('*U*U*U*U', '$2a$05$.WRrXibc1zPgIdRXYfv.4uu6TD1KWf0VnHzq/0imhUhuxSxCyeBs2'),
        ('', '$2a$05$Otz9agnajgrAe0.kFVF9V.tzaStZ2s1s4ZWi/LY4sw2k/MTVFj/IO'),

#
        # test vectors from http://www.openwall.com/crypt v1.2
        # note that this omits any hashes that depend on crypt_blowfish's
        # various CVE-2011-2483 workarounds (hash 2a and \xff\xff in password,
        # and any 2x hashes); and only contain hashes which are correct
        # under both crypt_blowfish 1.2 AND OpenBSD.
        #
        ('U*U', '$2a$05$CCCCCCCCCCCCCCCCCCCCC.E5YPO9kmyuRGyh0XouQYb4YMJKvyOeW'),
        ('U*U*', '$2a$05$CCCCCCCCCCCCCCCCCCCCC.VGOzA784oUp/Z0DY336zx7pLYAy0lwK'),
        ('U*U*U', '$2a$05$XXXXXXXXXXXXXXXXXXXXXOAcXxm9kjPGEMsLznoKqmqw7tc8WCx4a'),
        ('', '$2a$05$CCCCCCCCCCCCCCCCCCCCC.7uG0VCzI2bS7j6ymqJi9CdcdxiRTWNy'),
        ('0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ'
         '0123456789chars after 72 are ignored',
                '$2a$05$abcdefghijklmnopqrstuu5s2v8.iXieOjg/.AySBTTZIIVFJeBui'),
        (b'\xa3',
                '$2a$05$/OK.fbVrR/bpIqNJ5ianF.Sa7shbm4.OzKpvFnX1pQLmQW96oUlCq'),
        (b'\xff\xa3345',
            '$2a$05$/OK.fbVrR/bpIqNJ5ianF.nRht2l/HRhr6zmCp9vYUvvsqynflf9e'),
        (b'\xa3ab',
                '$2a$05$/OK.fbVrR/bpIqNJ5ianF.6IflQkJytoRVc1yuaNtHfiuq.FRlSIS'),
        (b'\xaa'*72 + b'chars after 72 are ignored as usual',
                '$2a$05$/OK.fbVrR/bpIqNJ5ianF.swQOIzjOiJ9GHEPuhEkvqrUyvWhEMx6'),
        (b'\xaa\x55'*36,
                '$2a$05$/OK.fbVrR/bpIqNJ5ianF.R9xrDjiycxMbQE2bp.vgqlYpW5wx2yy'),
        (b'\x55\xaa\xff'*24,
                '$2a$05$/OK.fbVrR/bpIqNJ5ianF.9tQZzcJfm3uj2NvJ/n5xkhpqLrMpWCe'),

# keeping one of their 2y tests, because we are supporting that.
        (b'\xa3',
                '$2y$05$/OK.fbVrR/bpIqNJ5ianF.Sa7shbm4.OzKpvFnX1pQLmQW96oUlCq'),

#
        # bsd wraparound bug (fixed in 2b)
        #

# NOTE: if backend is vulnerable, password will hash the same as '0'*72
        #       ("$2a$04$R1lJ2gkNaoPGdafE.H.16.nVyh2niHsGJhayOHLMiXlI45o8/DU.6"),
        #       rather than same as ("0123456789"*8)[:72]
        # 255 should be sufficient, but checking
        (("0123456789"*26)[:254], '$2a$04$R1lJ2gkNaoPGdafE.H.16.1MKHPvmKwryeulRe225LKProWYwt9Oi'),
        (("0123456789"*26)[:255], '$2a$04$R1lJ2gkNaoPGdafE.H.16.1MKHPvmKwryeulRe225LKProWYwt9Oi'),
        (("0123456789"*26)[:256], '$2a$04$R1lJ2gkNaoPGdafE.H.16.1MKHPvmKwryeulRe225LKProWYwt9Oi'),
        (("0123456789"*26)[:257], '$2a$04$R1lJ2gkNaoPGdafE.H.16.1MKHPvmKwryeulRe225LKProWYwt9Oi'),

#
        # from py-bcrypt tests
        #
        ('', '$2a$06$DCq7YPn5Rq63x1Lad4cll.TV4S6ytwfsfvkgY8jIucDrjc8deX1s.'),
        ('a', '$2a$10$k87L/MF28Q673VKh8/cPi.SUl7MU/rWuSiIDDFayrKk/1tBsSQu4u'),
        ('abc', '$2a$10$WvvTPHKwdBJ3uk0Z37EMR.hLA2W6N9AEBhEgrAOljy2Ae5MtaSIUi'),
        ('abcdefghijklmnopqrstuvwxyz',
                '$2a$10$fVH8e28OQRj9tqiDXs1e1uxpsjN0c7II7YPKXua2NAKYvM6iQk7dq'),
        ('~!@#$%^&*()      ~!@#$%^&*()PNBFRD',
                '$2a$10$LgfYWkbzEvQ4JakH7rOvHe0y8pHKF9OaFgwUZ2q7W2FFZmZzJYlfS'),

#
        # custom test vectors
        #

# ensures utf-8 used for unicode
        (UPASS_TABLE,
                '$2a$05$Z17AXnnlpzddNUvnC6cZNOSwMA/8oNiKnHTHTwLlBijfucQQlHjaG'),

# ensure 2b support
        (UPASS_TABLE,
                '$2b$05$Z17AXnnlpzddNUvnC6cZNOSwMA/8oNiKnHTHTwLlBijfucQQlHjaG'),

]

if TEST_MODE("full"):
        #
        # add some extra tests related to 2/2a
        #
        CONFIG_2 = '$2$05$' + '.'*22
        CONFIG_A = '$2a$05$' + '.'*22
        known_correct_hashes.extend([
            ("", CONFIG_2 + 'J2ihDv8vVf7QZ9BsaRrKyqs2tkn55Yq'),
            ("", CONFIG_A + 'J2ihDv8vVf7QZ9BsaRrKyqs2tkn55Yq'),
            ("abc", CONFIG_2 + 'XuQjdH.wPVNUZ/bOfstdW/FqB8QSjte'),
            ("abc", CONFIG_A + 'ev6gDwpVye3oMCUpLY85aTpfBNHD0Ga'),
            ("abc"*23, CONFIG_2 + 'XuQjdH.wPVNUZ/bOfstdW/FqB8QSjte'),
            ("abc"*23, CONFIG_A + '2kIdfSj/4/R/Q6n847VTvc68BXiRYZC'),
            ("abc"*24, CONFIG_2 + 'XuQjdH.wPVNUZ/bOfstdW/FqB8QSjte'),
            ("abc"*24, CONFIG_A + 'XuQjdH.wPVNUZ/bOfstdW/FqB8QSjte'),
            ("abc"*24+'x', CONFIG_2 + 'XuQjdH.wPVNUZ/bOfstdW/FqB8QSjte'),
            ("abc"*24+'x', CONFIG_A + 'XuQjdH.wPVNUZ/bOfstdW/FqB8QSjte'),
        ])

known_correct_configs = [
        ('$2a$04$uM6csdM8R9SXTex/gbTaye', UPASS_TABLE,
         '$2a$04$uM6csdM8R9SXTex/gbTayezuvzFEufYGd2uB6of7qScLjQ4GwcD4G'),
    ]

known_unidentified_hashes = [
        # invalid minor version
        "$2f$12$EXRkfkdmXnagzds2SSitu.MW9.gAVqa9eLS1//RYtYCmB1eLHg.9q",
        "$2`$12$EXRkfkdmXnagzds2SSitu.MW9.gAVqa9eLS1//RYtYCmB1eLHg.9q",
    ]

known_malformed_hashes = [
        # bad char in otherwise correct hash
        #                 \/
        "$2a$12$EXRkfkdmXn!gzds2SSitu.MW9.gAVqa9eLS1//RYtYCmB1eLHg.9q",

# unsupported (but recognized) minor version
        "$2x$12$EXRkfkdmXnagzds2SSitu.MW9.gAVqa9eLS1//RYtYCmB1eLHg.9q",

# rounds not zero-padded (py-bcrypt rejects this, therefore so do we)
        '$2a$6$DCq7YPn5Rq63x1Lad4cll.TV4S6ytwfsfvkgY8jIucDrjc8deX1s.'

# NOTE: salts with padding bits set are technically malformed,
        #      but we can reliably correct & issue a warning for that.
        ]

platform_crypt_support = [
        ("freedbsd|openbsd|netbsd", True),
        ("darwin", False),
        # linux - may be present via addon, e.g. debian's libpam-unix2
        # solaris - depends on policy
    ]

#===================================================================
    # override some methods
    #===================================================================
    def setUp(self):
        # ensure builtin is enabled for duration of test.
        if TEST_MODE("full") and self.backend == "builtin":
            key = "PASSLIB_BUILTIN_BCRYPT"
            orig = os.environ.get(key)
            if orig:
                self.addCleanup(os.environ.__setitem__, key, orig)
            else:
                self.addCleanup(os.environ.__delitem__, key)
            os.environ[key] = "true"
        super(_bcrypt_test, self).setUp()
        warnings.filterwarnings("ignore", ".*backend is vulnerable to the bsd wraparound bug.*")

def populate_settings(self, kwds):
        # builtin is still just way too slow.
        if self.backend == "builtin":
            kwds.setdefault("rounds", 4)
        super(_bcrypt_test, self).populate_settings(kwds)

#===================================================================
    # fuzz testing
    #===================================================================
    def crypt_supports_variant(self, hash):
        """check if OS crypt is expected to support given ident"""
        from passlib.handlers.bcrypt import bcrypt, IDENT_2X, IDENT_2Y
        from passlib.utils import safe_crypt
        ident = bcrypt.from_string(hash)
        return (safe_crypt("test", ident + "04$5BJqKfqMQvV7nS.yUguNcu") or "").startswith(ident)

fuzz_verifiers = HandlerCase.fuzz_verifiers + (
        "fuzz_verifier_bcrypt",
        "fuzz_verifier_pybcrypt",
        "fuzz_verifier_bcryptor",
    )

def fuzz_verifier_bcrypt(self):
        # test against bcrypt, if available
        from passlib.handlers.bcrypt import IDENT_2, IDENT_2A, IDENT_2B, IDENT_2X, IDENT_2Y, _detect_pybcrypt
        from passlib.utils import to_native_str, to_bytes
        try:
            import bcrypt
        except ImportError:
            return
        if _detect_pybcrypt():
            return
        def check_bcrypt(secret, hash):
            """bcrypt"""
            secret = to_bytes(secret, self.FuzzHashGenerator.password_encoding)
            if hash.startswith(IDENT_2B):
                # bcrypt <1.1 lacks 2B support
                hash = IDENT_2A + hash[4:]
            elif hash.startswith(IDENT_2):
                # bcrypt doesn't support $2$ hashes; but we can fake it
                # using the $2a$ algorithm, by repeating the password until
                # it's 72 chars in length.
                hash = IDENT_2A + hash[3:]
                if secret:
                    secret = repeat_string(secret, 72)
            elif hash.startswith(IDENT_2Y) and bcrypt.__version__ == "3.0.0":
                hash = IDENT_2B + hash[4:]
            hash = to_bytes(hash)
            try:
                return bcrypt.hashpw(secret, hash) == hash
            except ValueError:
                raise ValueError("bcrypt rejected hash: %r (secret=%r)" % (hash, secret))
        return check_bcrypt

def fuzz_verifier_pybcrypt(self):
        # test against py-bcrypt, if available
        from passlib.handlers.bcrypt import (
            IDENT_2, IDENT_2A, IDENT_2B, IDENT_2X, IDENT_2Y,
            _PyBcryptBackend,
        )
        from passlib.utils import to_native_str

loaded = _PyBcryptBackend._load_backend_mixin("pybcrypt", False)
        if not loaded:
            return

from passlib.handlers.bcrypt import _pybcrypt as bcrypt_mod

lock = _PyBcryptBackend._calc_lock # reuse threadlock workaround for pybcrypt 0.2

def check_pybcrypt(secret, hash):
            """pybcrypt"""
            secret = to_native_str(secret, self.FuzzHashGenerator.password_encoding)
            if len(secret) > 200:  # vulnerable to wraparound bug
                secret = secret[:200]
            if hash.startswith((IDENT_2B, IDENT_2Y)):
                hash = IDENT_2A + hash[4:]
            try:
                if lock:
                    with lock:
                        return bcrypt_mod.hashpw(secret, hash) == hash
                else:
                    return bcrypt_mod.hashpw(secret, hash) == hash
            except ValueError:
                raise ValueError("py-bcrypt rejected hash: %r" % (hash,))
        return check_pybcrypt

def fuzz_verifier_bcryptor(self):
        # test against bcryptor if available
        from passlib.handlers.bcrypt import IDENT_2, IDENT_2A, IDENT_2Y, IDENT_2B
        from passlib.utils import to_native_str
        try:
            from bcryptor.engine import Engine
        except ImportError:
            return
        def check_bcryptor(secret, hash):
            """bcryptor"""
            secret = to_native_str(secret, self.FuzzHashGenerator.password_encoding)
            if hash.startswith((IDENT_2B, IDENT_2Y)):
                hash = IDENT_2A + hash[4:]
            elif hash.startswith(IDENT_2):
                # bcryptor doesn't support $2$ hashes; but we can fake it
                # using the $2a$ algorithm, by repeating the password until
                # it's 72 chars in length.
                hash = IDENT_2A + hash[3:]
                if secret:
                    secret = repeat_string(secret, 72)
            return Engine(False).hash_key(secret, hash) == hash
        return check_bcryptor

class FuzzHashGenerator(HandlerCase.FuzzHashGenerator):

def generate(self):
            opts = super(_bcrypt_test.FuzzHashGenerator, self).generate()

secret = opts['secret']
            other = opts['other']
            settings = opts['settings']
            ident = settings.get('ident')

if ident == IDENT_2X:
                # 2x is just recognized, not supported. don't test with it.
                del settings['ident']

elif ident == IDENT_2 and other and repeat_string(to_bytes(other), len(to_bytes(secret))) == to_bytes(secret):
                # avoid false failure due to flaw in 0-revision bcrypt:
                # repeated strings like 'abc' and 'abcabc' hash identically.
                opts['secret'], opts['other'] = self.random_password_pair()

return opts

def random_rounds(self):
            # decrease default rounds for fuzz testing to speed up volume.
            return self.randintgauss(5, 8, 6, 1)

#===================================================================
    # custom tests
    #===================================================================
    known_incorrect_padding = [
        # password, bad hash, good hash

# 2 bits of salt padding set
#        ("loppux",                  # \/
#         "$2a$12$oaQbBqq8JnSM1NHRPQGXORm4GCUMqp7meTnkft4zgSnrbhoKdDV0C",
#         "$2a$12$oaQbBqq8JnSM1NHRPQGXOOm4GCUMqp7meTnkft4zgSnrbhoKdDV0C"),
        ("test",                    # \/
         '$2a$04$oaQbBqq8JnSM1NHRPQGXORY4Vw3bdHKLIXTecPDRAcJ98cz1ilveO',
         '$2a$04$oaQbBqq8JnSM1NHRPQGXOOY4Vw3bdHKLIXTecPDRAcJ98cz1ilveO'),

# all 4 bits of salt padding set
#        ("Passlib11",               # \/
#         "$2a$12$M8mKpW9a2vZ7PYhq/8eJVcUtKxpo6j0zAezu0G/HAMYgMkhPu4fLK",
#         "$2a$12$M8mKpW9a2vZ7PYhq/8eJVOUtKxpo6j0zAezu0G/HAMYgMkhPu4fLK"),
        ("test",                    # \/
         "$2a$04$yjDgE74RJkeqC0/1NheSScrvKeu9IbKDpcQf/Ox3qsrRS/Kw42qIS",
         "$2a$04$yjDgE74RJkeqC0/1NheSSOrvKeu9IbKDpcQf/Ox3qsrRS/Kw42qIS"),

# bad checksum padding
        ("test",                                                   # \/
         "$2a$04$yjDgE74RJkeqC0/1NheSSOrvKeu9IbKDpcQf/Ox3qsrRS/Kw42qIV",
         "$2a$04$yjDgE74RJkeqC0/1NheSSOrvKeu9IbKDpcQf/Ox3qsrRS/Kw42qIS"),
    ]

def test_90_bcrypt_padding(self):
        """test passlib correctly handles bcrypt padding bits"""
        self.require_TEST_MODE("full")
        #
        # prevents reccurrence of issue 25 (https://code.google.com/p/passlib/issues/detail?id=25)
        # were some unused bits were incorrectly set in bcrypt salt strings.
        # (fixed since 1.5.3)
        #
        bcrypt = self.handler
        corr_desc = ".*incorrectly set padding bits"

#
        # test hash() / genconfig() don't generate invalid salts anymore
        #
        def check_padding(hash):
            assert hash.startswith(("$2a$", "$2b$")) and len(hash) >= 28, \
                "unexpectedly malformed hash: %r" % (hash,)
            self.assertTrue(hash[28] in '.Oeu',
                            "unused bits incorrectly set in hash: %r" % (hash,))
        for i in irange(6):
            check_padding(bcrypt.genconfig())
        for i in irange(3):
            check_padding(bcrypt.using(rounds=bcrypt.min_rounds).hash("bob"))

#
        # test genconfig() corrects invalid salts & issues warning.
        #
        with self.assertWarningList(["salt too large", corr_desc]):
            hash = bcrypt.genconfig(salt="."*21 + "A.", rounds=5, relaxed=True)
        self.assertEqual(hash, "$2b$05$" + "." * (22 + 31))

#
        # test public methods against good & bad hashes
        #
        samples = self.known_incorrect_padding
        for pwd, bad, good in samples:

# make sure genhash() corrects bad configs, leaves good unchanged
            with self.assertWarningList([corr_desc]):
                self.assertEqual(bcrypt.genhash(pwd, bad), good)
            with self.assertWarningList([]):
                self.assertEqual(bcrypt.genhash(pwd, good), good)

# make sure verify() works correctly with good & bad hashes
            with self.assertWarningList([corr_desc]):
                self.assertTrue(bcrypt.verify(pwd, bad))
            with self.assertWarningList([]):
                self.assertTrue(bcrypt.verify(pwd, good))

# make sure normhash() corrects bad hashes, leaves good unchanged
            with self.assertWarningList([corr_desc]):
                self.assertEqual(bcrypt.normhash(bad), good)
            with self.assertWarningList([]):
                self.assertEqual(bcrypt.normhash(good), good)

# make sure normhash() leaves non-bcrypt hashes alone
        self.assertEqual(bcrypt.normhash("$md5$abc"), "$md5$abc")

def test_needs_update_w_padding(self):
        """needs_update corrects bcrypt padding"""
        # NOTE: see padding test above for details about issue this detects
        bcrypt = self.handler.using(rounds=4)

# PASS1 = "test"
        BAD1 = "$2a$04$yjDgE74RJkeqC0/1NheSScrvKeu9IbKDpcQf/Ox3qsrRS/Kw42qIS"
        GOOD1 = "$2a$04$yjDgE74RJkeqC0/1NheSSOrvKeu9IbKDpcQf/Ox3qsrRS/Kw42qIS"

self.assertTrue(bcrypt.needs_update(BAD1))
        self.assertFalse(bcrypt.needs_update(GOOD1))

#===================================================================
    # eoc
    #===================================================================

# create test cases for specific backends
bcrypt_bcrypt_test = _bcrypt_test.create_backend_case("bcrypt")
bcrypt_pybcrypt_test = _bcrypt_test.create_backend_case("pybcrypt")
bcrypt_bcryptor_test = _bcrypt_test.create_backend_case("bcryptor")
bcrypt_os_crypt_test = _bcrypt_test.create_backend_case("os_crypt")
bcrypt_builtin_test = _bcrypt_test.create_backend_case("builtin")

#=============================================================================
# bcrypt
#=============================================================================
class _bcrypt_sha256_test(HandlerCase):
    "base for BCrypt-SHA256 test cases"
    handler = hash.bcrypt_sha256
    reduce_default_rounds = True
    forbidden_characters = None
    fuzz_salts_need_bcrypt_repair = True
    alt_safe_crypt_handler = hash.bcrypt
    has_os_crypt_fallback = True

known_correct_hashes = [
        #
        # custom test vectors
        #

# empty
        ("",
            '$bcrypt-sha256$2a,5$E/e/2AOhqM5W/KJTFQzLce$F6dYSxOdAEoJZO2eoHUZWZljW/e0TXO'),

# ascii
        ("password",
            '$bcrypt-sha256$2a,5$5Hg1DKFqPE8C2aflZ5vVoe$12BjNE0p7axMg55.Y/mHsYiVuFBDQyu'),

# unicode / utf8
        (UPASS_TABLE,
            '$bcrypt-sha256$2a,5$.US1fQ4TQS.ZTz/uJ5Kyn.$QNdPDOTKKT5/sovNz1iWg26quOU4Pje'),
        (UPASS_TABLE.encode("utf-8"),
            '$bcrypt-sha256$2a,5$.US1fQ4TQS.ZTz/uJ5Kyn.$QNdPDOTKKT5/sovNz1iWg26quOU4Pje'),

# ensure 2b support
        ("password",
            '$bcrypt-sha256$2b,5$5Hg1DKFqPE8C2aflZ5vVoe$12BjNE0p7axMg55.Y/mHsYiVuFBDQyu'),
        (UPASS_TABLE,
            '$bcrypt-sha256$2b,5$.US1fQ4TQS.ZTz/uJ5Kyn.$QNdPDOTKKT5/sovNz1iWg26quOU4Pje'),

# test >72 chars is hashed correctly -- under bcrypt these hash the same.
        # NOTE: test_60_truncate_size() handles this already, this is just for overkill :)
        (repeat_string("abc123",72),
            '$bcrypt-sha256$2b,5$X1g1nh3g0v4h6970O68cxe$r/hyEtqJ0teqPEmfTLoZ83ciAI1Q74.'),
        (repeat_string("abc123",72)+"qwr",
            '$bcrypt-sha256$2b,5$X1g1nh3g0v4h6970O68cxe$021KLEif6epjot5yoxk0m8I0929ohEa'),
        (repeat_string("abc123",72)+"xyz",
            '$bcrypt-sha256$2b,5$X1g1nh3g0v4h6970O68cxe$7.1kgpHduMGEjvM3fX6e/QCvfn6OKja'),
        ]

known_correct_configs =[
        ('$bcrypt-sha256$2a,5$5Hg1DKFqPE8C2aflZ5vVoe',
         "password", '$bcrypt-sha256$2a,5$5Hg1DKFqPE8C2aflZ5vVoe$12BjNE0p7axMg55.Y/mHsYiVuFBDQyu'),
    ]

known_malformed_hashes = [
        # bad char in otherwise correct hash
        #                           \/
        '$bcrypt-sha256$2a,5$5Hg1DKF!PE8C2aflZ5vVoe$12BjNE0p7axMg55.Y/mHsYiVuFBDQyu',

# unrecognized bcrypt variant
        '$bcrypt-sha256$2c,5$5Hg1DKFqPE8C2aflZ5vVoe$12BjNE0p7axMg55.Y/mHsYiVuFBDQyu',

# unsupported bcrypt variant
        '$bcrypt-sha256$2x,5$5Hg1DKFqPE8C2aflZ5vVoe$12BjNE0p7axMg55.Y/mHsYiVuFBDQyu',

# rounds zero-padded
        '$bcrypt-sha256$2a,05$5Hg1DKFqPE8C2aflZ5vVoe$12BjNE0p7axMg55.Y/mHsYiVuFBDQyu',

# config string w/ $ added
        '$bcrypt-sha256$2a,5$5Hg1DKFqPE8C2aflZ5vVoe$',
    ]

#===================================================================
    # override some methods -- cloned from bcrypt
    #===================================================================
    def setUp(self):
        # ensure builtin is enabled for duration of test.
        if TEST_MODE("full") and self.backend == "builtin":
            key = "PASSLIB_BUILTIN_BCRYPT"
            orig = os.environ.get(key)
            if orig:
                self.addCleanup(os.environ.__setitem__, key, orig)
            else:
                self.addCleanup(os.environ.__delitem__, key)
            os.environ[key] = "enabled"
        super(_bcrypt_sha256_test, self).setUp()
        warnings.filterwarnings("ignore", ".*backend is vulnerable to the bsd wraparound bug.*")

def populate_settings(self, kwds):
        # builtin is still just way too slow.
        if self.backend == "builtin":
            kwds.setdefault("rounds", 4)
        super(_bcrypt_sha256_test, self).populate_settings(kwds)

#===================================================================
    # override ident tests for now
    #===================================================================
    def test_30_HasManyIdents(self):
        raise self.skipTest("multiple idents not supported")

def test_30_HasOneIdent(self):
        # forbidding ident keyword, we only support "2a" for now
        handler = self.handler
        handler(use_defaults=True)
        self.assertRaises(ValueError, handler, ident="$2y$", use_defaults=True)

#===================================================================
    # fuzz testing -- cloned from bcrypt
    #===================================================================
    class FuzzHashGenerator(HandlerCase.FuzzHashGenerator):

def random_rounds(self):
            # decrease default rounds for fuzz testing to speed up volume.
            return self.randintgauss(5, 8, 6, 1)

# create test cases for specific backends
bcrypt_sha256_bcrypt_test = _bcrypt_sha256_test.create_backend_case("bcrypt")
bcrypt_sha256_pybcrypt_test = _bcrypt_sha256_test.create_backend_case("pybcrypt")
bcrypt_sha256_bcryptor_test = _bcrypt_sha256_test.create_backend_case("bcryptor")
bcrypt_sha256_os_crypt_test = _bcrypt_sha256_test.create_backend_case("os_crypt")
bcrypt_sha256_builtin_test = _bcrypt_sha256_test.create_backend_case("builtin")

#=============================================================================
# eof
#=============================================================================